Pedal Rubber For Brake And Clutch Pedals. Shown As Number 19 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc /1200cc/ 1300cc Engines. Price is For 1 x Rubber
Clutch Cable. Shown As Item Number 2 In Diagram. Fits DFSK C31/C32 Pickup Models With 1500cc DK12-06 Engine. IMPORTANT:- Cable may need re-routing as slightly longer.
Clutch Release Bearing. Shown As Number 9 In The Diagram. Fits DFM / DFSK Loadhopper Models With a 1300cc Engine And "C" Series Vehicles With 1500cc Engine.
Repair Kit Includes Clutch Release Fork And All Springs. Shown As Numbers 4,7,8 And 10 In Diagram. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.
"C" Clip For Securing Upper Part of Gear Change Cables. Shown As Number 8 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc /1200cc/ 1300cc Engines.
TELEPHONE ORDERING ONLY.
5 Speed New Unit. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine. IMPORTANT:- GEARBOX OIL MUST BE CHANGED AT FIRST 1000 MILES AND EVERY 12 MONTHS THEREAFTER. FILL WITH 75W/80W OIL AND FILL UNTIL OIL FLOWS OUT OF LEVEL CHECK PLUG .IN THE EVENT OF A WARRANTY CLAIM DOCUMENTORY EVIDENCE WILL NEED TO BE PROVIDED SHOWING MILEAGE/ DATE UNIT FITTED AND OIL CHANGE DATE/MILEAGE INTERVALS
TELEPHONE ORDERING ONLY.
5 Speed New Unit. Fits DFSK "C" Series Models With A 1500cc DK15-06 Engine. IMPORTANT:- GEARBOX OIL MUST BE CHANGED AT FIRST 1000 MILES AND EVERY 6000 MILES THEREAFTER .IN THE EVENT OF A WARRANTY CLAIM DOCUMENTORY EVIDENCE WILL NEED TO BE PROVIDED SHOWING MILEAGE/ DATE UNIT FITTED AND OIL CHANGE DATE/MILEAGE INTERVALS
Centre Shaft 12mm Width Rear Bearing (Groove Circlip Open Type)Size 52-28-12.Shown As Number 29 In Diagram. Fits DFM / DFSK Models With a 1300cc Engine
Centre Shaft Sealed Rear Bearing (Circlip Groove 14mm Wide Type) Remove Side Seals If Required.Size 52-28-14.Shown As Number 29 In Diagram. Fits DFM / DFSK Models With a 1300cc Engine
Front Bearing For Gearbox Input Shaft. Remove Side Seals If Required Size 52-25-15. Shown As Number 6 In Diagram. Fits DFM / DFSK Models With a 1300cc Engine
Front Bearing For Gearbox Output Shaft. Remove Seals if Required. Size 75-32-20. Shown As Number 16 In Diagram. Fits DFM / DFSK Models With a 1300cc Engine
Gearshift Cable Set. Consisting of Both Upper and Side Cables. Shown As Numbers 3 And 4 In Diagram. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine.
IMPORTANT: WHEN REPLACING GEARSHIFT CABLES EXAMINE GEARLEVER BRACKET ASSEMBLY. BRACKETS CAN FRACTURE IN THE AREA OF WHERE CABLES MOUNT AND CAUSE GEAR SELECTION PROBLEMS!
Gearshift Cable Set. Consisting of Both Upper and Side Cables. Shown As Numbers 3 And 4 In Diagram. Fits DFSK C31/C32 Models with A 1500cc Engine.
IMPORTANT: WHEN REPLACING GEARSHIFT CABLES EXAMINE GEARLEVER BRACKET ASSEMBLY. BRACKETS CAN FRACTURE IN THE AREA OF WERE CABLES MOUNT AND CAUSE GEAR SELECTION PROBLEMS!
Brake-Clutch Pedal Box Assembly. Shown As Numbers 14-25 (3) In Diagram. Comes With Pedal Rubbers And Brake Light Switch. Fits DFM / DFSK Models With 1000cc/1200cc/ 1300cc Engines.
Speedometer Gearbox Speed Sensor. Shown As Item 2 In Diagram.Fits DFM / DFSK Loadhopper Models With A 1000cc Engine And 4x4 With 1300cc Engine. Secures to Gearbox With Pinch Bolt.
Differential Unit For Rear Axle. Ready To Fit. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine.
IMPORTANT:- DO NOT UNDER ANY CIRCUMSTANCES MOVE PINION NUTS TAGGED POSITION.